dino chopper
05-25-2004, 05:23 PM
Hi All
I have a 92 x2400. 60" The deck shows quite a bit of wear.
I have noticed that the mower streaks two different stripes. One area it lays the grass down and another it spits out a row of cut grass. Each of these happen when the grass is taller than usual (5"-6")
While inspecting the deck I noticed that the blade seem to be far away from the edge of the deck and baffles. My baffles don't look as pretty as the ones shown on the thread about "deck modifications for streaking" Mine are beat up and may have been replaced.
I have noticed that the end of the blade is about 1" from the baffle and other edges of the deck. Should these tolerances be tighter to help with vacuum?
I have a 92 x2400. 60" The deck shows quite a bit of wear.
I have noticed that the mower streaks two different stripes. One area it lays the grass down and another it spits out a row of cut grass. Each of these happen when the grass is taller than usual (5"-6")
While inspecting the deck I noticed that the blade seem to be far away from the edge of the deck and baffles. My baffles don't look as pretty as the ones shown on the thread about "deck modifications for streaking" Mine are beat up and may have been replaced.
I have noticed that the end of the blade is about 1" from the baffle and other edges of the deck. Should these tolerances be tighter to help with vacuum?